C++ Debugger Tips: Special expression and format specifiers

[  Tip  ]

There are special expression and format specifiers that you can use to better examine the content in the debugger's watch windows.

[Details]

Visual Studio's (native) C++ debugger has many useful features that can make your debugging much more pleasant, if you know what they are.

1.  by, wo, and dw operators

    For example, say we break after the following bit of code:

         int i = 0x12345678;

    You can use the by, wo, and dw operators to view contents of a variable as an unsigned byte, word, or dword:

          i                 0x12345678             int

          by i            0x78 'x'                    unsigned char

          wo i           0x5678                    unsigned short

          dw i           0x12345678            unsigned long

    You can also use the operators on a register to do the same to the destination of the register: 

         eax 0x0012ff2c                       unsigned long

          by eax       0x78 'x'                 unsigned char

          wo eax      0x5678                 unsigned short

          dw eax      0x12345678         unsigned long

      These come in handy when debugging through assembly.

2.  o, d, x operators

    Another way to change debugger output is through format specifiers.  These are directives passed after the expression, separated by a comma.

    For example, to change the radix out the output, you can append ',o' for octal, ',d' for decimal, or ',x' for hex:

          i       42                                  int

          i,o     052                              int

          i,d     42                                int

          i,x     0x0000002a                 int

3.  s, s8 ,su  operators

    To interpret a pointer expression as a string, you can use ',s' for an simple null-terminated string, ',s8' for a UTF-8 string, or ',su' for a Unicode string.

    (Note that the expression has to be a pointer type for this to work).

          char str[] = "hello";

          wchar_t str2[] = L"world";

    str                          0x0012ff00 "hello"                        char [6]

          str,s                        "hello"                                            char [6]

          str2                         0x0012fee8 "world"                     wchar_t [6]

          (void*)str2,su      "world"                                           void *

4.  m, mb, mw, md, mu, mq, ma  operators

    The memory operators can be used to display up to 64 bytes of memory in the preview line, as bytes, words, dwords, quads, or ascii characters. 

     str,m          0x0012ff00   68 65 6c 6c 6f 00 cc cc cc cc cc cc cc cc cc cc  hello.                   char [6]

       str,mb        0x0012ff00    68 65 6c 6c 6f 00 cc cc cc cc cc cc cc cc cc cc  hello.                   char [6]

       str,mw       0x0012ff00    6568 6c6c 006f cccc cccc cccc cccc cccc                                      char [6]

       str,md        0x0012ff00    6c6c6568 cccc006f cccccccc cccccccc                                          char [6]

       str2,mu      0x0012feec    0077 006f 0072 006c 0064 0000 cccc cccc  world.??              wchar_t [6]

       str,mq        0x0012ff00    cccc006f6c6c6568 cccccccccccccccc                                            char [6]

       str,ma         0x0012ff00    hello.(..(......T..                                                                     char [6]

5.  wc, wm, hr operators

    You can use ,wc ,wm and ,hr to view data as a window class, window message, or HRESULT.

       0x00400000,wc     WS_OVERLAPPEDWINDOW                                                   int

       0x10,wm               WM_CLOSE                                                                                   int

       0x10,hr                 0x00000010 The directory cannot be removed.                              Int

6.  !  operator

    You can use ,! to turn off STL visualizations on the expression:

      str       "hello world"                                                                                                       std::basic_string< ... >

       str,!     {_Bx={...} _Mysize=0x0000000b _Myres=0x0000000f}                               std::basic_string<...>

All of these operators can be used to ease the way you get to data while debugging, and become necessary when creating custom visualizations.

You can check-out the autoexp.dat file in your Visual Studio directory for examples of how to combine these operators and the visualization language to create custom visualizers for your own data.

Reference         -

http://blogs.msdn.com/b/vcblog/archive/2006/08/04/689026.aspx

Posted By :Ajay Kumar S.